Hall-research UVA-16X Bedienungsanleitung PDF herunterladen (Seite 5)

UV-16 Family of Mini-Cat

Senders

1. Introduction

1.1 General

This User’s Manual covers several models of Mini-Cat

Senders. The

senders can be any of the following models: UV1-S-16X or UVA-16X.

For these units, the number after the dash represents the quantity of

RJ45 outputs.

The transmission system is comprised of one Rack-Mount Sender unit

and one or more Receiver units (Sold Separately). There are 2

variations of the basic sender which can transmit Video along with

either Phantom Power (UV1-S-16X) or Video along with Line-Level

Audio (UVA-16X).

The senders convert the video inputs and either power or audio signals

into a format that can be transmitted using a single inexpensive and

commonly available Unshielded Twisted Pair (UTP) cable with RJ45

connectors. Both UTP and STP (shielded) cables can be used. In

addition you can use Cat5, 5e, 6, or higher. However, for runs of over

250 feet, Hall Research recommends using “Skew-free” or “Zero-

skew” Cat5 cables for best performance.

At the receiving (remote) end, a compatible receiver (sold separately)

is used to convert the UTP signal back to VGA and either power, audio

or RS232.

The product is housed in a 2 RU, 19” Rack mount enclosure and has

connectors for up to 16 video inputs and Audio depending on the

model, as well as multiple RJ45 output connectors for connection to the

remote systems.

The RJ45 outputs on the Sender can drive CAT5 LAN cables to 1000

feet (305 meters) with little to no degradation of video quality (500 feet

on some models) depending on resolution of the VGA signal (see table

3.2). The receiver can compensate for video signal losses in long cable

runs.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Keine Kommentare

Hall-research UVA-16X Bedienungsanleitung Seite 5